Cam Driven Thread Rolling Machine (Max Outer Diameter 22mm or 7/8”) - High quality Cam Driven Thread Rolling Machine (Max Outer Diameter 22mm or 7/8”) manufacturer from Taiwan | Yieh Chen Machinery Co., Ltd.

Cam Driven Thread Rolling Machine (Max Outer Diameter 22mm or 7/8”)

YC-20

Cam Driven Thread Rolling Machine (Max Outer Diameter 22mm or 7/8”) - YC-20. Thread Rolling Machine

Thread Rolling Machine (YC-20)

Incorporating gear speed reduction and cam operated rolling slide for convenient and precise production of a large range of threaded parts. These machines are equipped with lubricating systems to increase the durability of the slides.

Specification

yc-3t
Main Specification YC-20
Workpiece Range 工件
Outside Diameter 外徑 5-22 mm 3/16" - 7/8"
Thread Pitch 牙距 0.75 -2.5P 40 - 9 TPI
Max. Length 牙長 48 mm 1-7/8"
Roll Dies 牙輪
Rolling Speed 轉速
40 rpm
Max. Outside Diameter 最大外徑 120 mm
Inside Diameter 内徑 40 mm
Max. Width 寬度
50 mm
Max. Center Distance of Die-spindle 牙輪中心最大距離 140 mm
Min. Center Distance of Die-spindle 牙輪中心最小距離 100 mm
Output (Pcs/Min.) 滾製速度 9 - 30
Motor 3Ph A.C. 馬達
For Spindle 主軸
3HP
For Coolant Pump 冷卻泵
1/8HP
Machine Body 機體
Floor Space 佔地面積 1090 x 740 mm
Net Weight (Approx.) 淨重
970 kg
Gross Weight (Approx.) 毛重
1130 kg
Shipping Measurement (L x W x H) 包裝尺寸 (長x寬x高) 1240 x 850 x 1220 mm
The designs are subject to modification and improvement without notice.
此 機型規格設計、形狀如有任何修改,恕不另行通知。

Applications Gallerys

Contact Yieh Chen to Get a Quotation Now!

Search

Recommendation

SPLINE ROLLING MACHINE
SPLINE ROLLING MACHINE

The Spline Rolling Machine is inherently accurate, with surface finishes of 3 to 6 micro-inches obtainable. Spline Rolling Machine is using Rack die/cutter instead of Cylinder thread rolling die.

Read More

 
EXPERIENCE CUSTOM GEARS
EXPERIENCE CUSTOM GEARS

Founded in 1975 by six brothers, Six Star owns 40 years of experience on manufacturing gear products.

Read More

 

Yieh Chen Cam Driven Thread Rolling Machine (Max Outer Diameter 22mm or 7/8”) Service Introduction

Yieh Chen Machinery Co., Ltd. is Taiwan Cam Driven Thread Rolling Machine (Max Outer Diameter 22mm or 7/8”) supplier and manufacturer with more than 31 years experence. Since 1984, in the Gear and Machinery Manufacturer, Yieh Chen has been offering our customers high quality Cam Driven Thread Rolling Machine (Max Outer Diameter 22mm or 7/8”) production service. With both advanced technology and 31 years experience, Yieh Chen always make sure to meet each customer's demand.

Categories

Contact Us

Yieh Chen Machinery Co., Ltd.
TEL: 886-4-7221234
FAX: 886-4-7265265
Email: sales@yiehchen.com

Consult & Design by Ready-Market